1、 Working principle
Signal gate valves are commonly used in automatic sprinkler fire pipeline systems to monitor water supply pipelines and remotely indicate valve opening. By turning the handwheel, the thread between the handwheel and the valve stem can be controlled to advance or retract, and the valve plate connected to the valve stem can be raised or lowered to achieve the purpose of opening and closing.
2、 Product Introduction
The valve body material of the signal gate valve produced by our company is ductile iron, the valve plate material is ductile iron coated with rubber, the sealing material is EPDM, and the shaft material is chrome plated 45 # steel. The signal gate valve is equipped with a signal device that emits an electrical signal when the valve plate is released from the fully closed position. The production standard for signal gate valves is GB5135.6 Automatic Sprinkler Fire Extinguishing System Part 6: General Valves.
3、 Product advantages and uses
In addition to the advantages of elastic seat sealed gate valves, fire signal gate valves also have fast and reliable opening and closing, and can intuitively display the degree of valve opening, so as to distinguish the degree of valve opening from a distance and take corresponding measures in a timely manner. The fire signal gate valve is installed at both ends of the alarm valve group or at the inlet of each branch pipe of the system. When repairing the alarm valve group or pipeline network, close it. The signal gate valve is equipped with a signal device that can emit electrical signals to display the opening and status of the valve plate.
4、 Product technical parameters, installation dimensions
Applicable media: water, oil, gas, etc
Suitable temperature: 0-80 ℃
Signal power supply: DC24V, 3A
Nominal operating pressure: 1.6MPa
Test standard: GB13927 AP1598
6、 Installation and maintenance instructions
a. There should be a certain space around the signal gate valve for easy installation, maintenance, and operation;
b. During transportation and installation of signal gate valves, violent collisions should be avoided as much as possible to prevent damage to the sealing surface and micro switches, which may affect their sealing performance and the normal operation of the electrical signal system;
c. Do not disassemble or adjust the signal gate valve before and after installation;
d. After the installation of the signal gate valve, the valve plate should be fully opened and the inner cavity of the